CRATE ENGINE, GM BIG BLOCK -496ci FORGED INTERNALS W/ ALUMINUM HEADS -595HP WITH CARB & IGNITION

Block:
4 Bolt Main .060 over block, two piece rear seal, drivers side dipstick
Square and parallel decked
Align honed main bearing bore
Cylinders honed on computer controlled machine to within .0002
straightness and roundness
Cylinders are sonic tested for thickness


Rotating Assembly:
New SCAT forged steel crankshaft internally balanced
New SCAT 4340 forged connecting rods
150,000 psi rod bolts
Probe forged flat top Pistons
Hastings moly rings
Rotating assembly balanced to within 2 grams
Melling high volume oil pump
Hydraulic roller cam .566 intake lift, .566 exhaust lift
242 intake, 248 exhaust duration @ .050, 112 degrees lobe separation
Heavy duty double roller (high performance) timing set


Cylinder Heads:
AFR aluminum rectangular port cylinder heads with 305cc runners and 119cc chambers
Blueprint signature series tall alum. Valve covers
2.225 polished intake valves, 1.88 swirl polished exhaust valves
Comp Cams hardened push rods
Jessel roller rocker system with postitive lock adjusting nuts


A Ton Of Extras:
Edelbrock performer RPM airgap intake manifold
9.0 to 1 compression
Edelbrock 110 GPH mechanical fuel pump
Milodon cad plated oil pan
Brass freeze plugs
All engines are dyno tested on state-of-the-art DTS dyno and come with
a complete dyno sheet
30 month 50,000 mile warranty
Demon 850 CFM carburetor
MSD pro billet distributor w/ coil and plug wires
Edelbrock water pump
Professional Products harmonic balancer


Critical Specs:
Camshaft:
.566 Int / .566 Exh & 242 Int / 248 Exh duration @.050 112 degree lobe separation

Horsepower:
595

Torque:
615

Compression Ratio:
9.0 to 1

Ignition Timing:
16 to 18 Degree Initial / 36 Degree Total

This part fits most Chevrolet Cars and Trucks. Exceptions may apply. Please read the complete description to see if this part fits your specific vehicle and application.